2007 Honda CBR125

Rear Tyre worn close to the legal limit 1.2 mm (4.1.3(ii))

Rear Tyre worn close to the legal limit 1.2 mm (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies from front (1.3.1a)

Stop lamp does not illuminate immediately a brake applies from rear (1.3.1a)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

front brake pads worn tappered

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1a)