MOT Status
ExpiredMileage
147,257 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Front Brake pad(s) wearing thin (3.5.1g)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded Within 30cm of front A post. (2.4.A.3)
Centre Front Exhaust has a minor leak of exhaust gases from flexi found breaking up. (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear wheel bearing rough when rotated (2.6.1)
Rear registration plate insecure (6.3.1b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Nail in tyre ()
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Inner Tyre worn close to the legal limit 1.6mm (4.1.E.1)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
corrosion outside prescribed areas
Offside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
corrosion outside prescribed areas
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
front wipers smeering
rear exhaust mount in very poor condition
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Anti-roll bar linkage insecure (2.4.G.1)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front brake pads worn
child seat fitted not allowing full inspection of adult belt
nail in tyre
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HK02 KYT is a 2002 Mazda MPV in Silver with a 1,998cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2002 Mazda MPV models, the average MOT pass rate is 69.8% with a typical mileage of 79,256 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying HK02 KYT, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 24 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HK02 KYT?
You can check the full history of HK02 KYT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HK02 KYT registered?
HK02 KYT is a 2002 Mazda MPV, first registered on 26 July 2002.
Is HK02 KYT safe to buy?
The MOT history for HK02 KYT shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HK02 KYT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HK02 KYT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.