2013 Yamaha Wr

Rear reflector missing (4.8.2 (a) (ii))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Headlamp aim not tested (4.1.2 (b))

Front Headlamp aim projected beam image obviously incorrect led lamp fitted no pattern (4.1.2 (c))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate slightly loose (0.1 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Rear Shock absorber has an excessively worn bush lower bush (5.3.2 (c))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Shock absorber has a slightly worn bush upper bush (5.3.2 (c))

rear brake fluid level

Drive chain worn to excess (6.1.7 (c) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside exhaust heat shield not fully secure

rear tail fairing not fully secure

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))