2018 Sherco 300

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

No lights fitted at time of test. It should not be used at night or at times of reduced visibility.

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working (7.7 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement lower linkage (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Footrest insecure saftey pin missing (6.2.12 (a))

Offside Footrest insecure saftey pin missing (6.2.12 (a))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement lower linkage (5.3.4 (a) (i))

Rear brake pad pin missing