2016 Sfm Zz

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust baffle secured with amalgamating tape

Exhaust noisy (8.1.1 (a))

Rear brake fluid reservoir on minimum level

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffle not fitted (8.1.1 (a))

Headlamp aim too low (4.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Rear brake fluid reservoir on minimum level

Headlamp aim too low (4.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

appears rear brake pads may be incorrect for this bike but secure and operating correctly

Clutch lever bent (6.2.7 (b))

Exhaust has a minor leak of exhaust gases silencer joint (6.1.2 (a))

small cuts in sidewall of rear tyre

Exhaust has a major leak of exhaust gases centre joint (6.1.2 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Rear Brake disc significantly and obviously worn buckled (1.1.14 (a) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Steering operation restricted in free movement from lock to lock on steering lock (2.1.4 (c))

Suspension arm pin or bush excessively worn swinging arm bearings (5.3.4 (a) (i))

Clutch lever bent (6.2.7 (b))

small cuts in sidewall of rear tyre