2006 Honda Cbr 125 RS-5

Motorcycle structure joining/attachment plate or fastening insecure lower fairing insecure (6.1.1 (b) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Exhaust noisy (7.1.2)

Inner Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Handlebar deformed (2.1.1b)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

handlebars out of alignment straight ahead position

Headlamp aim too high (1.6)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Headlamp aim too low (1.6)

Inner Front Fairings insecure and likely to impede the steering (2.1.2e)

Nearside Front Motorcycle structure cracked (6.1.1a)

Rear Drive chain excessively loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))