MOT Status
ExpiredMileage
82,662 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Nail in tyre ()
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit worn on inside edge (4.1.E.1)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded in wheel arch (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded in wheel arch (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Nail in tyre ()
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit worn on inside edge (4.1.E.1)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front front brake binding (3.7.B.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Offside Front Tyre worn close to the legal limit edge 2mm (4.1.E.1)
Offside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive floor (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (5.2.6)
Nearside Rear rear brake binding (3.7.B.1)
Nearside Rear rear brake excessively fluctuating (3.7.B.3)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Offside Front Tyre worn close to the legal limit edge 2mm (4.1.E.1)
Offside Rear Radius arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive floor (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor pan (5.2.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front wiperblades deteriorating
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front wiperblades deteriorating
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Exhaust system corroding
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brakes squeal under light breaking
Items removed from driver's view prior to test
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear front brake fluctuating, but not excessively (3.7.B.3)
Nearside front brake grabbing slightly
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear front brake fluctuating, but not excessively (3.7.B.3)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Washer bottle low on water
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
under side of car slightly corroded
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside front brake binding (3.7.B.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
under side of car slightly corroded
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear brake caliper has restricted free movement (3.5.1k)
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
long handbrake travel
rear tyre treads stepped/mishaped slightly
o/s/r parking brake effiency low compared with n/s/r
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HG03 JGX is a 2003 Mazda 323 in Black with a 1,991cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying HG03 JGX, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HG03 JGX?
You can check the full history of HG03 JGX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HG03 JGX registered?
HG03 JGX is a 2003 Mazda 323, first registered on 28 March 2003.
Is HG03 JGX safe to buy?
The MOT history for HG03 JGX shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HG03 JGX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HG03 JGX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.