2018 Benelli Bn 125

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Suspension component pin or bush excessively worn swing arm bushes (5.3.4 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively ware in rear sprocket carrier /bearing (6.1.7 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement swing arm bushes (5.3.4 (a) (i))

Front Brake disc worn, but not excessively slight run out (1.1.14 (a) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Offside Front Stop lamp not working (4.3.1 (a) (ii))

Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened (6.2.7 (b))

Central Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Central Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain worn but not considered excessive tight on links (6.1.7 (c) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swing arm (5.3.4 (a) (i))