2014 Sherco 300

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Central Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Pro link bush (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement Pro link (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement rear suspension linkage (5.3.4 (a) (i))

rear tyre pressure low

Front Tyre incorrectly seated on the wheel rim (5.2.3 (k))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement rear suspension linkage (5.3.4 (a) (i))

front & rear tyre pressures low

nearside chain adjuster loose

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement rear suspension linkage bearings (5.3.4 (a) (i))

marks in rear tyre sidewall offside

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate does not conform to the specified requirements deteriorated (0.1 (d))

Registration plate does not conform to the specified requirements incorrect angle (0.1 (d))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Horn slightly loose horn / light switch (7.7 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement rear suspension linkage bearings (5.3.4 (a) (i))

mars in rear tyre sidewall offside

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear Stop lamp missing (4.3.1 (a) (ii))