2003 Yamaha WR250F

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Shock absorber has a light misting of oil (5.3.2 (b))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

no lights fitted at time of test

DAY TIME MOT

day time only no lights

Vehicle only to be used during daylight hours. Not to be used during times of reduced visibility.

Drive chain excessively tight (6.2.1d)

Vehicle only to be used during daylight hours. Not to be used during times of reduced visibility.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Hydraulic brake control feels spongy (3.1.4a)

Front Tyre is unsuitable (4.1.1)

Rear Tyre is unsuitable (4.1.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Steering movement excessively rough with the weight on the lower bearing (2.2.1a)

Drive chain worn but not considered excessive (6.2.1e)

Front wheel bearings have slight free play (2.3.5b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bearing has slight free play (2.4.A2a(i))

number plate light not working

Exhaust markings indicating not for road use or similar wording (7.1.4)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre is unsuitable (4.1.1)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre is unsuitable (4.1.1)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Registration plate not displaying a BSAU 145d marking (6.3.3b)

Registration plate obscured (6.3.1d)