2013 Superbyke Rmr 125

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Horn sound not in accordance with requirements (7.7 (c))

Shock absorber has a serious fluid leak both front fork legs and starting to contaminate brake (5.3.2 (b))

Suspension component has excessive wear or free play rear lower shock mount (5.3.3 (d))

Wheel spindle loose front (5.2.1 (c) (i))

Chain guard missing ()

Direction indicator flashing more than 120 times a minute left hand (4.4.4 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Chain guard missing ()

Suspension ball joint worn, but not excessively Swingarm (5.3.4 (a) (i))

Tyre worn close to the legal limit Front (5.2.3 (e))

Wheel bearing has slight play front (5.1.3 (a) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Chain guard missing ()

Suspension ball joint worn, but not excessively Swingarm (5.3.4 (a) (i))

Tyre worn close to the legal limit Front (5.2.3 (e))

Wheel bearing has slight play front (5.1.3 (a) (i))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) DANGEROUS

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Chain guard missing ()

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement Swingarm (5.3.4 (a) (i))

Front Tyre has cut in sidewall.

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Handlebar deformed (2.1.1b)

Headlamp insecure (1.2.3b)

Nearside Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Rear Direction indicators not working (1.5.1c)

Rear reflector on motorcycle obscured (1.4.2b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Tyre has cut in sidewall.

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)