2013 Longjia Unknown

All direction indicators slightly discoloured (4.4.3 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension corroded but not seriously weakened Very pitted (5.3.3 (b) (i))

Offside Front Suspension corroded but not seriously weakened pitted (5.3.3 (b) (i))

Offside Front Throttle grip damaged

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Fuel cap sealing washer slightly perished

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear seat damaged

All position lamps not working (4.2.1 (a))

Front Brake excessively binding (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Headlamp aim unable to be tested (4.1.2 (b))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Horn sound not in accordance with requirements (7.7 (c))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i))

Front Tyre has a tear caused by separation or partial failure of its structure Splitting on side walls (5.2.3 (d) (ii)) DANGEROUS

All direction indicators slightly discoloured (4.4.3 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension corroded but not seriously weakened Very pitted (5.3.3 (b) (i))

Offside Front Suspension corroded but not seriously weakened pitted (5.3.3 (b) (i))

Offside Front Throttle grip damaged

Rear Fuel cap sealing washer slightly perished

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear seat damaged

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Headlamp lens slightly defective scratched does not affect headlamp aim (4.1.1 (b) (i))

Front Steering headbearing slightly stiff or notchy slightly notchy when wheel raised (2.2.2 (f) (i))

Front front tyre starting to perish in tread

Nearside Front Suspension corroded but not seriously weakened forks pitted but not leaking (5.3.3 (b) (i))

Offside Front Suspension corroded but not seriously weakened pitted but not leaking (5.3.3 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Position lamp incorrect colour (4.2.3 (a) (i))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Shock absorber has slight external damage to the casing slightly reduced damping affect (5.3.2 (b))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear fuel cap sealing washer starting to split on edge sealing part ok

Front Indicator switch inoperative (4.4.2 (a) (ii))

Front Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle grip broken could affect throttle control (6.2.7 (a) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Headlamp lens slightly defective scratched does not affect headlamp aim (4.1.1 (b) (i))

Front Steering headbearing slightly stiff or notchy slightly notchy when wheel raised (2.2.2 (f) (i))

Front front tyre starting to perish in tread

Nearside Front Suspension corroded but not seriously weakened forks pitted but not leaking (5.3.3 (b) (i))

Offside Front Suspension corroded but not seriously weakened pitted but not leaking (5.3.3 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Position lamp incorrect colour (4.2.3 (a) (i))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Shock absorber has slight external damage to the casing slightly reduced damping affect (5.3.2 (b))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear fuel cap sealing washer starting to split on edge sealing part ok

Front front forks slightly pitted

Rear Position lamp incorrect colour (4.2.3 (a) (i))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear fuel cap sealing washer splitting on edges

Front Headlamp aim too high (4.1.2 (a))

Rear Registration plate inscription illegible broken (0.1 (b))

Front front forks slightly pitted

Rear Position lamp incorrect colour (4.2.3 (a) (i))

Rear Stop lamp slightly discoloured (4.3.1 (a) (ii))

Rear fuel cap sealing washer splitting on edges