2003 Sym Dd 50

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Registration plate deteriorated but not likely to be misread (0.1 (b))

head lamp deflector fitted

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

headlamp deflector fitted

number plate deteriorated

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

headlamp deflector fitted

number plate deteriorated

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

deflector fitted to head lamp

exhaust rusty

slight damage to no plate

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

deflector fitted to head lamp

exhaust rusty

slight damage to no plate

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has slight external damage to the casing (5.3.2 (b))

exhaust corroded

number plate damaged.

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has slight external damage to the casing (5.3.2 (b))

exhaust corroded

number plate damaged.

slight bind on front brake

Headlamp aim beam image kick up to the offside (1.6)

slight bind on front brake

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim too low (1.6)

Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)

Rear Brake lever has inadequate reserve travel (3.1.3b)