2007 Dodge Caliber

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe corroded (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint likely to become detached bottom bllj joint (5.3.4 (a) (ii)) DANGEROUS

Offside Front Suspension arm ball joint likely to become detached bottom ball joint (5.3.4 (a) (ii)) DANGEROUS

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Brake fluid warning lamp illuminated (1.1.10 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

2 FRONT BRAKE DISCS CORRODED

4 TYRE TREADS LOW

FRONT SUBFRAME CORRODED HEAVILY

4 TYRE TREADS LOW

2 FRONT BRAKE DISCS CORRODED

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

FRONT SUBFRAME CORRODED HEAVILY

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Play in steering rack inner joint(s) ()

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion to front & rear suspension components

rear tie rod bushes/temporarily repaired

sill covers fitted

Rear Suspension component mounting prescribed area is excessively corroded subframe (2.4.A.3)

Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Play in steering rack inner joint(s) ()

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion to front & rear suspension components

sill covers fitted

Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe (2.4.A.3)

Rear trailing arm lower rod end bushes split

corrosion to suspension components-rear subframe just passable'

movement in rack & pinion

rear tyre edges worn below limit

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Suspension component mounting prescribed area is excessively corroded subframe (2.4.A.3)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front Suspension component mounting prescribed area is corroded but not considered excessive subframe (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe (2.4.A.3)

Rear trailing arm lower rod end bushes split

corrosion to suspension components-rear subframe just passable'

movement in rack & pinion

rear tyre edges worn below limit

Play in steering rack inner joint(s)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS