1996 Honda CBR600F

Exhaust noisy (8.1.1 (a))

Rear Suspension arm corroded but not seriously weakened swing arm (5.3.3 (b) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements size (0.1 (d))

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Position lamp adversely affected by the operation of another lamp when indicators on (4.2.3 (b))

Rear Position lamp light intensity significantly reduced when indicators on both sides (4.2.3 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Valve stem slightly damaged (5.2.3 (j))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

n/s/f switch gear loose on bars

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Drive chain slightly loose (6.2.1d)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) has excessive run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)