1990 Bedford Midi

Boot lid insecure (6.2.1 (a) (i))

Emissions unable to be completed coolant leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Down pipe to middle pipe (6.1.2 (a))

Front Windscreen washer not working (3.5 (a))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced next to towing eye (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Shock absorbers has a slightly worn bush Both (5.3.2 (c))

Hand brake lever has long travel

Integral body structure is corroded but structural rigidity is not significantly reduced Underbody corroded (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Engine mount deteriorated

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component pin or bush excessively worn leaf spring (5.3.4 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front of wheel arch (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front of wheel arch (6.1.1 (c) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside door mirror missing

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both inner sills (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides, rear of wheel arches (6.1.1 (c) (i))

fuel cap seal perished

fuel pump slightly insecure

Front Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arches o/s/f and both rear (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

fuel pump slightly insecure

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Leaf spring has slight wear in a shackle pin and/or bush both sides (2.4.B.2)

front tyres perished slightly

Front registration plate missing (6.3.1a)

Horn not working (1.6.2a)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Brake hose excessively damaged (3.6.B.4d)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Leaf spring has slight wear in a shackle pin and/or bush both (2.4.B.2)

coolant leak at metal pipe under front of engine

o/s/f n/s/f inner wheel arches corroded

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside rear brake recording little or no effort (3.7.B.5a)

Both rear leaf spring bushes split

corroded in many places

Horn not working (1.6.2a)

Offside Front Suspension spring mounting prescribed area is severely distorted (2.4.A.3)

corroded in many places

Nearside Front front brake binding (3.7.B.1)

Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

brake ferruls corroded

front upper suspension spring prescribed areas starting to corrode

Nearside Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

both front floors coroded

both rear sills corroded

nearside rear brake slightly tight when rotated by hand

van has slight corrosion in none structual places

Nearside Rear Rear wheel bearing has slight play (2.6.2)

slight corrosion on front metal brake pipes

slight corrosion on two rear axle brake pipes

slight crack in front number plate

slight cracking at both front flexible brake hoses

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Rear Exhaust mounting missing (7.1.1b)

slight corrosion forming on front and rear brake pipes

slight crack in front number plate

slight cracking at both front flexible brake hoses

slight play in nearside rear wheel bearing

structure rusty in places

rear bumper poor condition

slight cracking on wiper blades

slight play in rear suspension hubs

slight rusting on brake pipes