MOT Status
ExpiredMileage
68,773 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
heavy underseal
Offside Rear lower quarter panel/bumper panel corroded
Horn not working (1.6.2a)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Horn not working (1.6.2a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Horn not a continuous or uniform sound (1.6.2e)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all along inner and outer sills (6.1.B.2)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch has various holes (2.4.A.3)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch has various holes (2.4.A.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all along inner and outer sill (6.1.B.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch has various holes (2.4.A.3)
Offside Headlamp aim too low and too far to the right. (1.8)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner section behind wheel arch (6.1.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch has various holes (2.4.A.3)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various sections corroded through to holes (6.1.B.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear wheel bearing has slight play (2.6.2)
Oil leak ()
cowling on steering column adrift
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
crack in exhaust system down pipe
rear exhaust leaking
vehicle heavily corroded
Indicator tell tale inoperative (1.4.A.2a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
crack in exhaust system down pipe
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front constant velocity joint is insecure (2.5.C.1b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp insecure (1.7.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing has excessive play (2.6.2)
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brake pedal travel
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear wheel bearing has excessive play (2.6.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing has excessive play (2.6.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Rear Rear wheel bearing has slight play (2.6.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Registration plate lamp not working (1.1.5c)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Rear Rear wheel bearing has slight play (2.6.2)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3) DANGEROUS
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Offside Front Suspension component mounting prescribed area is fractured (2.4.A.3) DANGEROUS
Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1) DANGEROUS
n/s inner sill corroded not within 30cm of anything
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
How Reliable is the Talbot Express?
Based on 171,025 MOT tests across 8,371 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H72 GUR is a 1991 Talbot Express in White with a 1,905cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 1991 Talbot Express models, the average MOT pass rate is 65.3% with a typical mileage of 71,041 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 6,812 recorded failures. If you're considering buying H72 GUR, it's worth having these areas checked by a mechanic before committing.
The Talbot Express typically stays on UK roads for around 41 years. At 35 years old, this Talbot Express is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H72 GUR?
You can check the full history of H72 GUR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H72 GUR registered?
H72 GUR is a 1991 Talbot Express, first registered on 17 April 1991.
Is H72 GUR safe to buy?
The MOT history for H72 GUR shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H72 GUR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H72 GUR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.