1991 Talbot Express

All direction indicators not working (4.4.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch x2 places (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect European lights fitted (4.1.2 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect European headlight (4.1.2 (c))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Coolant leak ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside headlight damaged

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear tyres 18 years old

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

n/s and o/s front inner wings corroded not prescribed area

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside headlamp beam kick masked at time of test

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside headlamp beam kick masked at time of test

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrules x 2 (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules x 2 (3.6.B.4e)

Nearside Front Brake hose has slight corrosion to ferrules x 2 (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules x 2 (3.6.B.4e)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Bumper insecure

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak ()

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Hazard warning lamps inoperative (1.4.B.1b)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp tell tale not working (1.3.1b)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Brake hose bulging under pressure (3.6.B.3)

Registration plate lamp not working (1.1.C.1d)

Battery insecure

Oil leak

main beam warning light inop

nearside front inner wing starting to corrode

offside and nearside front inner sills corroded

Exhaust system not adequately supported (7.1.1)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Headlamp main beam warning lamp not working

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)