1991 Honda Civic Shuttle

Front Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 195/45/15, inner edge (5.2.3 (e))

Nearside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 195/45/15, inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 195/45/15, inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 195/45/15, inner edge (5.2.3 (e))

Play in steering rack inner joint(s) ()

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Upper and lower on both sides (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

slight play in inner track arms

Front N/S and O/S track rod end boots perished

N/S/F Outer CV boot has pinhole

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Play in steering rack inner joint(s) ()

Weep from steering rack N/S

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Nail in tyre Screw ()

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Plastic undertrays fitted preventing a full inspection of some components

Power steering component(s) has slight seepage from a component steering rack (2.3.3b)

rear of exhaust pipe deteriorated

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Power steering component(s) has slight seepage from a seal steering rack (2.3.3b)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

plastic sill covers fitted

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

plastic sill covers fitted unable to carryout a full inspection

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

plastic sill cover fitted

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Plastic Sill covers preventing a full inspection

Items removed from driver's view prior to test

Offside Front position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Plastic sill covers fitted

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Power steering pipe(s) or hose(s) leaking (2.3.3b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Nearside Front Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)