1991 Honda CBR1000F

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front wheel bearings are excessively rough (2.3.5b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings are slightly rough (2.3.5b)

Front Front wheel bearings are slightly rough (2.3.5b)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)