1991 BMW K Series

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Offside Front shock absorber has light misting of stanchion (2.3.3)

rear brake pedal slightly corroded;;; drive shaft rubber splitting

Both front discs, carriers and mounting pins worn.

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Brake fluid reservoir leaking hydraulic fluid (3.2.B1e)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front floating disc has movement on both sides

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front floating disc has movement on both sides

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))