1990 Yamaha T80

Rear mudgaurd/body structure corroded

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp dipped beam affected by the operation of the horn (1.2.2c)

Headlamp main beam affected by the operation of the horn (1.2.2c)

Offside Rear Motorcycle structure excessively corroded (6.1.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear mudgaurd/body structure corroded

Exhaust slightly deteriorated (7.1.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering linkage has slight free play (2.2.2)

Nearside Front Steering linkage has slight free play (2.2.2)

Brake lever cannot be released smoothly (3.1.3d)

Front Floor brake test indicates a sticking brake (3.3.C2c)

Horn is not continous or uniform (1.7.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Steering linkage has slight free play (2.2.2)

front tyre sidewalls perished

Motorcycle structure slightly corroded (6.1.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Motorcycle structure slightly corroded (6.1.1a)