1992 Rover Mini

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Knuckle joint (5.3.4 (b) (ii))

Nearside Front Upper Suspension component mounting prescribed area fractured significantly reducing structural strength Shock mount (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Knuckle joint (5.3.4 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Rear Brake making bad gridding sound when braking advise customer to have inspected

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Front suspension has a suspension lower ball joint securing nut not locked both (2.5.B.1a)

Nearside Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Nearside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt missing (2.4.G.2)

Nearside rear brake binding (3.7.B.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Fuel cap/sealing device sealing washer torn (7.2.4c)

Offside Headlamp aim too high (1.8)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Steering rack gaiter split both (2.2.D.2d)

Suspension arm locating pin locking device missing both (2.4.G.3b)

registration plate character(s) incorrectly spaced both (6.3.4a)

all tyres perished

both front top shock mount nuts not locked

n/s cv boot clip missing

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Stop lamp not working (1.2.1b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Emissions not tested (7.0)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Exhaust emits clearly visible black smoke during acceleration (7.3.A.2c)

Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Rear Rear fog lamp not working (1.3.2b)