2004 Suzuki Gsxr 1000 K4

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Headlamp aim too low (4.1.2 (a))

Handlebar mounting clamp loose (2.1.1a)

Exhaust noisy (7.1.2)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake component has been modified. (3.1.5)

Front Wheel modified but not significantly reducing the original strength (4.2.1a)

Front suspension has been modified (2.3.8)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Nearside Subframe Has been repaired

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Front Direction indicator obscured (1.5.1a)

Offside Front Direction indicator obscured (1.5.1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate characters incorrectly spaced (6.3.4a)

Registration plate characters laid out in an incorrect format (6.3.4f)

Registration plate margin less than the minimum requirement (6.3.4g)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct stroke width (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Nearside Subframe Has been repaired

No Registration plate light Fitted

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

day time mot

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

day time mot

day time mot

day time mot test