2003 Honda CG125

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Foot rest bent

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit Tyre cracking on side wall and in treads (5.2.3 (e))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Foot rest bent

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit Tyre cracking on side wall and in treads (5.2.3 (e))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Headlamp aim too high (4.1.2 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

no front side light

tape applied to headlamp

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pedal has inadequate reserve travel (3.1.3b)

no front side light

tape applied to headlamp

Front Tyre valve stem slightly misaligned (4.1.2c)

Front tyre valve cap missing

Rear Lower swinging arm bolt loose

Rear Tyre valve stem slightly misaligned (4.1.2c)

Rear tyre valve cap missing

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Headlamp aim too high (1.6)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Wheel alignment incorrect which adversely affects the steering (2.5.1) DANGEROUS

Headlamp masks/converters fitted

Headlamp masks/converters fitted

Headlamp aim too high (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)