2007 Piaggio Porter

Age related corrosion to underside

Brake pipe corroded, covered in grease or other material Front to rear corroded (1.1.11 (c))

Front Headlamp reflector slightly defective Both (4.1.1 (b) (i))

Brake pipe corroded, covered in grease or other material pipe from load valve to flexi (1.1.11 (c))

Fuel tank corroded

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Reverse light not working

Service brake binding but not excessively Both rear (1.2.1 (f))

Brake pipe corroded, covered in grease or other material rear pipe load valve to flexi hose (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

corrosion on fuel tank

reverse light inop

Brakes imbalanced across an axle rear 54%(o/s rear low reading) (1.2.1 (b) (i))

Exhaust system insecure exhaust snapped at rear box (6.1.2 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material rear pipe load valve to flexi hose (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

corrosion on fuel tank

reverse light inop

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear service brake efficiency just meets requirements

Horn not working (7.7 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear service brake efficiency just meets requirements

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

exhaust system corroded.

Brake pipe corroded, covered in grease or other material rear pipe flexi to cylinder (1.1.11 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting repair covered in underseal n/s rear outter sill (5.3.6 (a) (i))

o/s and n/s front tyres slight wear on edges

reverse light inop

Service brake efficiency below requirements (1.2.2 (a) (i))

reverse light inop

Brake pipe corroded, covered in grease or other material rear pipe flexi to cylinder (1.1.11 (c))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting repair covered in underseal n/s rear outter sill (5.3.6 (a) (i))

o/s and n/s front tyres slight wear on edges

Coolant leak ()

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake load sensing valve stiff (3.6.E.3)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust system not adequately supported (7.1.1)

Fuel tank leaking (7.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front tyres wearing on inner edges (offside heavily)

both rear tyres wearing on inner edges

front brake pads appear to be wearing low

slight play in steering idler arm bush