2006 Kawasaki ER5

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Steering headbearing has slight free play whee raised (2.2.2 (f) (i))

Front Steering headbearing slightly stiff or notchy wheel raised (2.2.2 (f) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Footrest missing (6.2.12 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Steering headbearing has slight free play whee raised (2.2.2 (f) (i))

Front Steering headbearing slightly stiff or notchy wheel raised (2.2.2 (f) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Nearside Rear Footrest insecure retaining clip missing (6.2.12 (a))

Rear Brake excessively binding (1.2.1 (f))

Stop lamp not working (4.3.1 (a) (ii))

Wheel spindle locking device missing (5.2.1 (d))

Chain guard missing ()

Drive chain slightly tight (6.1.7 (k) (i))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Front Brake disc worn, but not excessively slight run out (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear sprocket carrier bearing play

Headlamp aim too low (4.1.2 (a))

Front Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Footrest missing (6.2.1a)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))