2003 Piaggio Px 200 E

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Horn not working (7.7 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Fuel cap ineffective (6.1.3 (b) (i))

Horn sound not in accordance with requirements (7.7 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Stop lamp not working (4.3.1 (a) (ii))

Central Lower Motorcycle structure cracked (6.1.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Riders seat insecure (6.2.1a)

Front Front wheel bearings have slight free play (2.3.5b)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Horn not working (1.7.3a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))