2003 Honda XR125L

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Tyre is unsuitable (5.2.3 (a))

Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Tyre is unsuitable (5.2.3 (a))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Lower shock bush. (5.3.4 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate does not conform to the specified requirements Badly deteriorated. (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain horseshoe locking device likely to become detached Missing.DANGEROUS. (6.1.7 (j) (ii)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Lower shock bush. (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.2.1e)

Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Front shock absorber has light misting of stanchion (2.3.3)