2002 Honda Nes 125-Y

Brake lever is short but brake can still be readily applied (3.1.3c)

Front Horn not working (1.7.3a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Rear wheel has a loose wheel bolt(s) (4.2.3a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Tyre worn close to the legal limit (4.1.3(ii))

Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Registration plate deteriorated (6.3.1d)

Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Stop lamp remains on when the brake is released (1.3.1e)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Tyre worn close to the legal limit (4.1.3(ii))

Brake pad(s) close to minimum limit (3.2.A1f(i))

Front shock absorber has light misting of stanchion (2.3.3)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) DANGEROUS

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))