1974 Rover 3500

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill closing panel (6.1.1 (c) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Lower Suspension arm corroded but not seriously weakened BOTH SIDES FRONT AND REAR (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Parking brake unbalanced

O/S REAR INNER TO OUTER WING SEAM CORRODED

SOME HEAVILY UNDERSEALED AREAS DIFFICULT TO ACCESS FOR CORROSION

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

FRONT DISCS POOR PITTED CONDITION

O/S REAR INNER TO OUTER WING SEAM CORRODED

SOME HEAVILY UNDERSEALED AREAS DIFFICULT TO ACCESS FOR CORROSION

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear bumper insecure

front registration plate is cracked

front tyres are wearing on the outer edges

nearside front inner wing is corroded

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp not working on main beam (1.7.5a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear bumper insecure

front registration plate is cracked

front tyres are wearing on the outer edges

nearside front inner wing is corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Oil leak

front registration plate is cracked

offside and nearside front inner wings have slight corrosion

offside and nearside rear inner wheel arches has slight corrosion

refer to section 2 overleaf

Rear rear brake grabbing slightly (3.7.A.5b)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear brake disc excessively scored (3.5.1h)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)