1982 Mercedes-benz 200

Nearside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear fog lamp not working (1.3.2b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn is a gong (1.6.2c)

Nearside Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too low (1.8)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear coil spring modified but not seriously weakened (2.4.A.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt (2.4.G.4e)

Offside Rear coil spring modified but not seriously weakened (2.4.A.2)

Oil leak

Tow ball/hitch not fitted at time of test

bonnet release cable modified

floor corroded

horn mounting corroded

Battery insecure (1.9.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside rear brake binding (3.7.B.1)

Offside Front Direction indicators obviously incorrectly positioned (1.4.A.2b)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside rear brake binding (3.7.B.1)

Trailer electrical socket insecure (1.9.3a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear coil spring modified but not seriously weakened (2.4.A.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt (2.4.G.4e)

Offside Rear coil spring modified but not seriously weakened (2.4.A.2)

Oil leak

Tow ball/hitch not fitted at time of test

bonnet release cable modified

floor corroded

horn mounting corroded

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Braking system leaking (3.6.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust mounting missing (7.1.1b)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear brake disc excessively pitted (3.5.1h)

Nearside rear brake binding (3.7.B.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

n/s/f wing mirror glass deteriorated