2005 Mercedes-benz Viano

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Nearside Play in steering rack inner joint(s) ()

Rear Shock absorbers has light misting of oil Both (5.3.2 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 (6.1.1 (c) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both (4.7.1 (b) (ii))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Nearside Play in steering rack inner joint(s) ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake hose excessively deteriorated N/s and o/s (1.1.12 (b) (ii))

Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 (6.1.1 (c) (i))

Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Brake prescribed area is excessively corroded Around abs pump (1.1.21 (e) (i))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Shock absorbers has a serious fluid leak Both (5.3.2 (b))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/s and o/s near coil springs (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Play in steering rack inner joint(s) ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor / chassis rail above level device (6.1.1 (c) (i))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor / chassis rail above level device (6.1.1 (c) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Play in steering rack inner joint(s) ()

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Play in steering rack inner joint(s) ()

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, chalked (within suspension arm mounting) (5.3.6 (a) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chalked (6.1.6 (i) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis and box section (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, chalked (within suspension arm mounting) (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Box section (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Droplink (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))

Nearside Sill corroded and holed outside of prescribed areas

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake prescribed area is corroded but not considered excessive Chassis under abs pump (1.1.21 (e) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))

Offside Sill corroded and holed outside of prescribed areas

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive box section near sub-frame rear mounting (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear wheel arch corroded but no obvious projection

Nearside inner sill corroded but not withing prescribed areas

Nearside outer sill corroded but not withing prescribed areas

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive box section near sub-frame rear mounting (5.3.6 (a) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear wheel arch corroded but no obvious projection

Offside outer sill corroded but not withing prescribed areas

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside inner sill corroded but not within prescribed areas

Offside Front Anti-roll bar linkage ball joint has slight play droplink (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside outer sill corroded but not within prescribed areas

Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

vehicle has been undersealed

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside front tyre worn on outer edge

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Emissions not tested (7.0)

Offside Rear Air suspension accumulator totally deflated (2.4.D.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside front tyre worn on outer edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)