1990 Honda C90MG

All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))

Exhaust noisy (8.1.1 (a))

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Lower Brake cable insecure (1.1.15 (c))

Rear Wheel spoke excessively loose x2 (5.2.2 (d))

Wheel spindle loose inc sprocket carrier (5.2.1 (c) (i))

Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Chain guard missing ()

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Exhaust noisy (7.1.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

no chain guard fitted

oil leak

Front Floor brake test indicates a sticking brake (3.3.C2c)

Horn not working (1.7.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride joining link clip (6.2.1h)

Offside Front Direction indicator insecure (1.5.3b)

Rear Footrest missing both (6.2.1a)

Rear suspension bush has excessive free play swinging arm (2.4.A2a(i))

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Steering control handlebar movement restricted by trapped cables (2.1.2c)

Stop lamp remains on when the brake is released front brake (1.3.1e)

Exhaust noisy (7.1.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

no chain guard fitted

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp damaged but function not impaired (1.1.1b)

Wheel alignment slightly misaligned. (2.5.1)

high / low beam switch wrong way

rear tyre slightly cracking on walls

rear tyre slightly unseated on rim