1990 Honda NS125

Front Front wheel bearings are excessively rough (2.3.5b)

Rear Rear reflector on motorcycle missing (1.4.1)

Brake drum(s) securing bolt(s) loose (3.2.A1g)

Brake pedal is damaged and the brake cannot be readily applied (3.1.3c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Horn not working (1.7.3a)

Nearside Headlamp aim too high (1.6)

Offside Headlamp aim too high (1.6)

Rear Brake component has an inadequate repair (3.1.5)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Steering control handlebar movement restricted by taut cables (2.1.2c)

Drive chain slightly loose (6.2.1d)

Registration plate deteriorated (6.3.1d)

Drive chain slightly loose (6.2.1d)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Front Footrest insecure (6.2.1a)

Rear suspension bush has excessive free play (2.4.A2a(i))

Brake fluid reservoir fluid level dangerously low (3.2.B1d) DANGEROUS

Centre Rear suspension has an inadequate repair of a load bearing member or its supporting structure. (2.4.A.2d) DANGEROUS

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Offside Inner Front Fairings insecure but not likely to impede the steering (2.1.2e)

Oil leak

Rear Tyre valve stem slightly misaligned (4.1.2c)