1990 Honda H100

Direction indicator flashing more than 120 times per minute (1.5.1c)

Front Brake lever cannot be released smoothly (3.1.3d)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Headlamp aim too high (1.6)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Offside Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Offside Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Handlebar slightly corroded. (2.1.1b)

Front Lower Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Rear shock absorber has a light misting (2.4.A.1c)

Rear Wheel spoke slightly corroded. (4.2.1b)

headlamp has slight water ingress

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Lower Front suspension assembly component loose (2.3.1)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

headlamp has slight water ingress

Horn not working (1.7.3a)

Offside Rear Direction indicators not working (1.5.1c)

Rear Tyre has ply or cord exposed (4.1.2a(iii)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Offside Rear Rear shock absorber has a light misting (2.4.A.1c)

h/bars slightly bent

Direction indicators not working (1.5.1c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Tyre has ply or cord exposed (4.1.2a(iii)

Tyre worn close to the legal limit (4.1.3(ii))

fork inners are pitted

h/ bars slightly bent