2014 Zontes Zt

rear brake pedal catches the silencer but doesn't effect it

Floor brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))

rear brake pedal catches the silencer but doesn't effect it

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

chain guard broken

Drive chain excessively tight (6.1.7 (k) (i))

Front Position lamp not working (4.2.1 (a))

Headlamp aim too high (4.1.2 (a))

Rear Footrest missing passenger footrests missing (6.2.12 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

chain guard broken

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Shock absorber has a reduced damping effect both forks (5.3.2 (b))

Front tyre has an uneven wear pattern

Nearside Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Headlamp aim too high (4.1.2 (a))

Rear Motorcycle structure joining/attachment plate or fastening insecure swing arm bolt loose - tightened at the garage (6.1.1 (b) (i))