MOT Status
ValidMileage
87,554 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
EML lamp on at time of test
Gearbox mounting defective rear mounting worn ()
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Fuel Pipe/s corroded fuel filler pipes ()
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material nearside and offside showing signs of corrosion (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and inside wheel arch corroded within prescribed area. (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded within prescribed area (6.1.1 (c) (i))
EML lamp on at time of test
Gearbox mounting defective rear mounting worn ()
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Fuel Pipe/s corroded fuel filler pipes ()
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material nearside and offside showing signs of corrosion (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded fuel filler neck ()
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Gearbox mounting defective ()
Registration plate deteriorated but not likely to be misread small crack (0.1 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Fuel Pipe/s corroded fuel filler neck ()
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Gearbox mounting defective ()
Registration plate deteriorated but not likely to be misread small crack (0.1 (b))
Engine mounting damaged but not to excess advanced wear in mounting bush (rear mounting) (6.1.8 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wear in rear bush (5.3.4 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced corrosion to outer sill and lower wheel arch (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wear in rear bush (5.3.4 (a) (i))
Rear corrosion to subframe
clutch pedal anti-slip provision missing.
fuel tank filler pipes corroded
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Exhaust emissions exceed manufacturer's specified limit mean value 3.70m-1 plate 0.80m-1 (8.2.2.2 (a))
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Engine mounting damaged but not to excess advanced wear in mounting bush (rear mounting) (6.1.8 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wear in rear bush (5.3.4 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced corrosion to outer sill and lower wheel arch (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wear in rear bush (5.3.4 (a) (i))
Rear corrosion to subframe
clutch pedal anti-slip provision missing.
fuel tank filler pipes corroded
Fuel filler pipe corroded
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values Plate limit 0.80 (8.2.2.2 (f))
Engine management light on
Fuel filler pipe corroded
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Engine management light on
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel filler neck and breather corroded
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Driver's seat with a defective structure (6.2.5 (a) (i))
Exhaust emissions exceed manufacturer's specified limit Plate limit 0.80 (8.2.2.2 (a))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Engine management light on
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel filler neck and breather corroded
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel filler neck corroded
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Slight wear offside front seat
Exhaust emissions exceed manufacturer's specified limit Plate limit 0.8 (8.2.2.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Engine management light on
Fuel filler neck corroded
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Nail in tyre ()
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Slight wear offside front seat
Engine management light on
Fuel filler neck and breather tube corroding
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Slight wear offside front seat
Fuel filler neck and breather pipe corroding
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Slight wear offside front seat
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Fuel filler neck and breather pipe corroding
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Slight wear offside front seat
Fuel filler neck and breather pipe corroding
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Slight deterioration rear lower gearbox mount
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
both rear and offside front tyres perishing on side walls
Rear Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nail in offside rear tyre
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) wearing thin (3.5.1g)
Nail in offside rear tyre
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
child seat fitted to nearside rear, not allowing full inspection of adult belt
Child seat fitted to nearside rear, not allowing full inspection of adult belt
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
child seat fitted to nearside rear, not allowing full inspection of adult belt
slight wear front brake discs
How Reliable is the Hyundai Elantra?
Based on 73,040 MOT tests across 6,045 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FY06 FMV is a 2006 Hyundai Elantra in Silver with a 1,991cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Hyundai Elantra models, the average MOT pass rate is 71.3% with a typical mileage of 69,622 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai Elantra fails its MOT is parking brake: efficiency below requirements, accounting for 5,323 recorded failures. If you're considering buying FY06 FMV, it's worth having these areas checked by a mechanic before committing.
The Hyundai Elantra typically stays on UK roads for around 25 years. At 20 years old, this Hyundai Elantra is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FY06 FMV?
You can check the full history of FY06 FMV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FY06 FMV registered?
FY06 FMV is a 2006 Hyundai Elantra, first registered on 31 March 2006.
Is FY06 FMV safe to buy?
The MOT history for FY06 FMV shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FY06 FMV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FY06 FMV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.