2006 Por Apache 125

Brake locking device missing locking pin missing from rear brake arm (3.2.A1e)

Rear suspension bush has excessive free play (2.4.A2a(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain excessively tight (6.2.1d)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Headlamp aim too high (1.6)

Rear Brake reaction bracket insecure locking pin is missing (3.2.A1j)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Direction indicators not working (1.5.1c)

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Drive chain excessively tight (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Rear Brake reaction bracket insecure (3.2.A1j)

Rear Wheel spoke excessively loose (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension movement is excessively stiff (2.4.A.3b)

Registration plate with character(s) which are not the correct height (6.3.4a)

Front fork assembly insecure

No chain guard fitted

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)