2013 White Knuckle 125

Rear wheel slightly tight to turn

the wiring under the headlight loose

unable to read the brake fluid on both resivoirs

Footrest slightly loose both sides (6.2.12 (a))

Front brake caliper mounts are worn

Offside Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Shock absorber has a slightly worn bush both the top and bottom bush (5.3.2 (c))

Drive chain excessively tight (6.1.7 (k) (i))

Front Tyre is unsuitable fitted incorrectly (5.2.3 (a))

Horn not working (7.7 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Footrest slightly loose both sides (6.2.12 (a))

Front brake caliper mounts are worn

Offside Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Shock absorber has a slightly worn bush both the top and bottom bush (5.3.2 (c))

Rear wheel slightly tight to turn

Registration plate deteriorated but not likely to be misread (0.1 (b))

the wiring under the headlight loose

unable to read the brake fluid on both resivoirs

indicators slightly discoloured (slightly white)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

drive chain rusty and stiff (requires lubrication)

indicators slightly discoloured (slightly white)