2008 Shineray Xy 125 Gy VIII

Lock stops mis-adjusted

No lights fitted at time of test

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel spoke slightly loose Several (5.2.2 (d))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

No lights fitted at time of test

Brake cylinder severely damaged (3.2.B1b)

Drive chain excessively tight (6.2.1d)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake lever insecure (3.1.2a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Handlebar deformed (2.1.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Steering lock stop ineffective (2.1.3)

Offside Footrest insecure (6.2.1a)

Offside Steering lock stop ineffective (2.1.3)

Rear Brake pipe union leaking fluid (3.2.B4)

Rear Hydraulic brake control creeps under load. (3.1.4a)

Rear Hydraulic brake control feels spongy (3.1.4a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Throttle operating incorrectly (6.2.1f)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

No lights fitted at time of test

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Wheel alignment slightly misaligned. (2.5.1)

Steering headbearing has slight free play (2.2.2)

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front Wheel spoke missing (4.2.1b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake hose excessively deteriorated (3.2.B3b)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering headbearing has excessive free play (2.2.2)

Rear Brake component worn but not seriously reduced in strength (3.2.A1)