2011 Qingqi Qm 125-2V

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread CRACKED (0.1 (b))

Front Brake hose porous MASTER CYCLINDER HOSE (1.1.12 (e))

Rear Wheel hub excessively worn CUSH DRIVE (5.2.1 (b) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread CRACKED (0.1 (b))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement swing arm bush (5.3.4 (a) (i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Central Inner Rear suspension bush deteriorated but not excessively swing arm bushes bearings (2.4.A2a(i))

Offside Front handlebar switch loose

Brake lever is short but brake can still be readily applied front brake lever slightly short (3.1.3c)

front mudguard insecure

front fork legs slightly but wheel alignment ok

Front wheel spindle securing nut locking device missing (2.3.5a)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Brake back plate(s) insecure (3.2.A1j)

Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j)

Rear reflector on motorcycle missing (1.4.1)

drive chain clip fitted wrong way

front fork legs slightly but wheel alignment ok