2009 Skyjet Sj 125-23

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Stop lamp not working (4.3.1 (a) (ii))

Handlebar mounting insecure indicator switch (2.2.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Brake component has restricted free movement and operation is likely to be impeded lever catches throttle cable (3.2.A1h)

Front Brake lever cannot be applied smoothly (3.1.3d)

Headlamp switch insecure (1.2.4)

Indicator switch insecure (1.5.4)

Offside Rear Footrest insecure (6.2.1a)

Offside Front Foot rest rubber missing

Offside Headlamp switch insecure (1.2.4)

Clutch lever bent so it cannot be readily operated. (6.2.1g)

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake component has restricted free movement and operation is likely to be impeded lever catches throttle cable (3.2.A1h)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake lever is positioned so that the brake cannot be readily applied (3.1.3c)

Headlamp aim headlamp damaged and function impaired bulb not positioned correctly (inside of headlamp burnt) (1.2.3a)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Indicator switch insecure (1.5.4)

Offside Front Direction indicator missing (1.5.1a)

Offside Rear Footrest insecure circlip missing (6.2.1a)

Offside Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride chain adjuster loose (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Registration plate insecure (6.3.1b)

Rear Brake locking device missing (3.2.A1e) DANGEROUS

Front Brake component is slightly distorted front brake pads worn uneven (3.1.5)

Offside Front footrest missing rubber

Offside headlamp not working (dipped beam)

Offside headlamp not working (main beam)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

passing light control switch - button sticks

rear brake master cylinder dust rubber perished

throttle cable not secure

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust is leaking and excessively noisey (7.1.1b)

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly tight (6.2.1d)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)