2004 Suzuki Gn 125 E

Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Tyre worn close to the legal limit (5.2.3 (e))

Offside Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Front Position lamp not working (4.2.1 (a))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim not tested (4.1.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Engine mounting/bracket bracket missing Top (6.1.8 (a) (ii)) DANGEROUS

Front Brake pad(s) missing (1.1.13 (c)) DANGEROUS

Clutch lever bent (6.2.7 (b))

slight cracking on front tyre

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

slight cracking on front tyre

Drive chain worn to excess (6.2.1e) DANGEROUS

Rear suspension has a fracture of a load bearing member or its supporting structure. rear swing arm cracked (2.4.A.2d) DANGEROUS

Drive chain sprocket slightly worn front and rear (6.2.1e)

Drive chain excessively loose (6.2.1d)

Horn not working (1.7.3a)

Offside Front Direction indicator not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)