MOT Status
ExpiredMileage
192,918 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheelarch/sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheelarch/sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Heatshield loose
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Emissions not tested (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases back box (6.1.2 (a))
Front Windscreen washer not working (3.5 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Emissions not tested (8.2.1.2 (d))
Front Windscreen washer not working (3.5 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Fuel Pipe/s corroded tank filler neck ()
Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering component has slight seepage from a component resovoir (2.1.5 (a))
Rear Coil spring corroded ns and os (5.3.1 (b) (i))
catalytic converter heat shield loose
incorrect auxiliary belt fitted {too narrow}
rear inner sills corroded
rear wheel arches corroded
rear wiper blade split badly
front and rear brake pipe unions corroded
front washers poor
nsf and osf lower arm bushes splitting
nsr suspension bushes worn and misaligned
nsr tyre worn on the inner edge badly
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
engine oil sump starting to corrode
front screen washers poor
engine management light on
front brake discs and pads worn low
nsf wiper blade deteriorated
play in both rear antiroll bar drop links
rear discs and pads worn and corroded
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both rear antiroll bar links are knocking slightly
both rear discs are corroded
nsr tyre worn low
rear brake pads are wearing thin
Front washer jet aim is poor {too high}
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front washer jet aim is poor {too high}
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)
Engine oil filter leaking through corroded spot
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
rear wiper blade is split badly
o/s/r tyre starting to wear on inner edge
rear wiper blade split
Centre Rear Stop lamp not working (1.2.1b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
o/s/r tyre starting to wear on inner edge
rear wiper blade split
Engine oil leak from timing chain cover
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
front washers poor
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Fr-v?
Based on 261,543 MOT tests across 14,531 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FE54 FAF is a 2004 Honda Fr-v in Blue with a 1,998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 2004 Honda Fr-v models, the average MOT pass rate is 73.7% with a typical mileage of 86,910 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda Fr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,946 recorded failures. If you're considering buying FE54 FAF, it's worth having these areas checked by a mechanic before committing.
The Honda Fr-v typically stays on UK roads for around 22 years. At 22 years old, this Honda Fr-v is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FE54 FAF?
You can check the full history of FE54 FAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FE54 FAF registered?
FE54 FAF is a 2004 Honda Fr-v, first registered on 27 October 2004.
Is FE54 FAF safe to buy?
The MOT history for FE54 FAF shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FE54 FAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FE54 FAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.