2009 Yamaha YP250

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake cylinder leaking hydraulic fluid (3.2.B1e)

Rear Hydraulic brake control creeps under load. (3.1.4a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Rear Plate brake test indicates a binding brake (3.3.B1a)

Front wheel bearings are slightly rough (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Front Plate brake test indicates a sticking brake (3.3.B1a)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Brake lever has inadequate reserve travel (3.1.3b)