MOT Status
ExpiredMileage
80,494 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed within subframe mounting (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed within subframe mounting (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed within subframe mounting (5.3.6 (a) (i))
Offside Front chassis leg corroded holed near radiator support
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
no high level brake light
radiator support corroded and holed
Exhaust has a minor leak of exhaust gases front exhaust pipe rear joint (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Tyre slightly damaged/cracking or perishing nearside rear and offside rear tyres slight cracking/ perishing (5.2.3 (d) (ii))
front lower cross member corroded/ holed not within any prescribed area
passengers side lower marker lights not working
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing within strut top mounting (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases front exhaust pipe rear joint (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Tyre slightly damaged/cracking or perishing nearside rear and offside rear tyres slight cracking/ perishing (5.2.3 (d) (ii))
front lower cross member corroded/ holed not within any prescribed area
passengers side lower marker lights not working
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Front corrosion near suspension turret - not within prescribed area
Rear Tyre has a cut but not deep enough to reach the ply or cords both rear tyres have cuts/damage to tread (5.2.3 (d) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level has 3 leds not working (4.3.1 (a) (i))
Fuel tank leaking (6.1.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within strut top - corroded/holed (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases hole/blowing at rear exhaust hangar (6.1.2 (a))
Exhaust mounting defective both rear exhaust rubbers perished/cracking (6.1.2 (a))
Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front corrosion near suspension turret - not within prescribed area
Rear Tyre has a cut but not deep enough to reach the ply or cords both rear tyres have cuts/damage to tread (5.2.3 (d) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level has 3 leds not working (4.3.1 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill /door step corroded and holed but not within a prescribed area (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower inner wheel arch and lower outer jacking point corroded and holed but not within a prescribed area (6.1.1 (c) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))
internal headlamp leveling switch taped over at time of test
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within suspension bed mounting (5.3.6 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within suspension bed mounting (5.3.6 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill /door step corroded and holed but not within a prescribed area (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced lower inner wheel arch and lower outer jacking point corroded and holed but not within a prescribed area (6.1.1 (c) (i))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Upper Outline marker lamp not working (4.2.1 (a))
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
The emissions will need retesting
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
The emissions will need retesting
Nearside Front Sub-frame attachment slightly corroded (2.4.G.1)
Offside Front Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Sub-frame attachment slightly corroded (2.4.G.1)
Offside Front Sub-frame attachment slightly corroded (2.4.G.1)
Front chasi has slight corrosion in places
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high and too far to the right. (1.8)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear exhaust rubbers starting to crack
Front chasi has slight corrosion in places
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear exhaust rubbers starting to crack
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Windscreen wiper blade insecure (8.2.2)
How Reliable is the Fiat Motorhome?
Based on 51,040 MOT tests across 2,628 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FD05 ZHV is a 2005 Fiat Motorhome in White with a 2,800cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 62.1%.
Across all 2005 Fiat Motorhome models, the average MOT pass rate is 79.1% with a typical mileage of 34,894 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Motorhome fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 606 recorded failures. If you're considering buying FD05 ZHV, it's worth having these areas checked by a mechanic before committing.
The Fiat Motorhome typically stays on UK roads for around 38 years. At 21 years old, this Fiat Motorhome is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FD05 ZHV?
You can check the full history of FD05 ZHV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FD05 ZHV registered?
FD05 ZHV is a 2005 Fiat Motorhome, first registered on 12 July 2005.
Is FD05 ZHV safe to buy?
The MOT history for FD05 ZHV shows 29 tests with a 62.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FD05 ZHV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FD05 ZHV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.