1989 Yamaha Vmax

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front tyre showing signs of perishing.

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

An item not tested (Manual)

Brake pedal has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Brake pedal pivots slightly worn (3.1.3a)

Centre stand fractured and likely to break

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Brake locking device missing (3.2.A1e)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear position lamp insecure (1.1.1c)

Registration plate insecure (6.3.1b)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Brake pedal pivots slightly worn (3.1.3a)

Centre stand fractured and likely to break

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front shock absorber has light misting of stanchion (2.3.3)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too low (1.6)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pipe excessively corroded (3.2.B2a)

Front Footrest insecure (6.2.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate insecure (6.3.1b)

rad hose leak