1989 Talbot Express

Exhaust system corroded

Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner arch corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Nearside Front Lower Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Upper Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Offside Front Lower Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Upper Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust system corroded

Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner arch corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front passenger door catch deteriorated but the door can still be readily opened and closed handle loose (6.2.3 (c) (i))

various areas of corrosion/holed,not in prescribed

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect 'kick up' to the wrong side (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area .within 30cm of spring mount (5.3.6 (a) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch,within 30cm of top mount (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect 'kick up' to the wrong side (4.1.2 (c))

Exhaust mounting defective various rubbers broken or perished (6.1.2 (a))

Front passenger door catch deteriorated so the door cannot be readily opened or closed handle loose (6.2.3 (c) (i))

Offside Rear Lower assister spring mounting loose

various areas of corrosion/holed, not in prescribed areas

Headlamp aim projected beam image is obviously incorrect Kick up to offside , both lamps (4.1.2 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill/ B pillar area (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember area (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corner sill/ crossmember area (5.3.6 (a) (i))

Windscreen wiper not working Both (3.4 (a))

Exhaust mounting defective All exhaust rubbers perished (6.1.2 (a))

Front passenger door catch deteriorated so the door cannot be readily opened or closed Outer door handle loose (6.2.3 (c) (i))

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Various areas of corrosion, Nearside and Offside in arch areas (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output beambenders (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output beambenders (4.1.4 (b))

Front Headlamp light intensity severely reduced both (4.1.4 (a))

Front Headlamp not working on dipped beam both (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake did not lock during brake test

Offside Front Brake hose has slight corrosion to ferrules both (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules both (3.6.B.4e)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

all metal brake pipes under sealed

Offside Headlamp insecure (1.7.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Headlamp aim not tested (1.8.A.1c)

Horn not working (1.6.2a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Nearside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front brake did not lock during brake test

Offside Front Brake hose has slight corrosion to ferrules both (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules both (3.6.B.4e)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

all metal brake pipes under sealed

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

exhaust system slight corrosion on pipes and silencers

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

perishing to both rear tyres

Direction indicators not working (1.4.A.2c)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too low (1.8)

Rear Registration plate lamp not working (1.1.C.1d)

perishing to both rear tyres

Front Exhaust has a minor leak of exhaust gases (7.1.2)

rear tyres perishing

Front registration plate missing (6.3.1a)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

rear tyres perishing

Both rear wheel bearings noisey

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Brake hose slightly damaged (3.6.B.4d)

o/s front tyre cracked

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear wheel bearing has slight play (2.6.2)

N/S/R WHEEL ARCH STARTING TO CORRODE

SLIGHT CRACKING TO O/S/F TYRE

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear wheel bearing has slight play (2.6.2)

Centre Rear Brake hose excessively deteriorated (3.6.B.4d)