2009 Yamaha Wr 125 X

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Chain guard missing ()

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Steering headbearing has slight free play (2.2.2 (f) (i))

Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake master cylinder leaking hydraulic fluid (3.2.B1e)

Indicator switch insecure (1.5.4)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp remains on when the brake is released (1.3.1e)

Front Brake fluid reservoir leaking hydraulic fluid (3.2.B1e) DANGEROUS

Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c) DANGEROUS

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Handlebar deformed (2.1.1b)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Exhaust noisy (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust noisy (7.1.2)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))